Prototype Kran Wudhu Otomatis Berbasis Arduino Uno

Ramadhaningrum Ramadhaningrum, Rahmat Hidayatullah, Reza Fahlevie F.Afidh

Abstract


The conventional ablution system has a weakness where the use of water is wasteful because humans forget to turn off the faucet or faucets that are easily damaged due to frequent use by humans. The purpose of the research is to make ablution easier, save water use and automate water faucets and tub filling. By utilizing an automatic ablution device with a distance sensor (ultrasonic sensor) as a human detector in taking ablution water and the control system is the Arduino Uno. The method used in this study is the waterfall method where in this method there are steps to work on the research, namely, needs analysis, tool design, tool making and coding, tool testing and tool implementation. In this study, it can be concluded that if the distance is 30 cm then the solenoid valve is active and water comes out, if the distance is > 30 cm then the solenoid valve is not active and the water does not flow and if the sensor distance to the water surface is 18 cm then the water pump will turn on. the sensor distance to the water surface is < 5 cm, the water pump will turn off

Keywords


Arduino Uno; Sensor Ultrasonik; Solenoid Valve; Water Pump

Full Text:

PDF


DOI: https://doi.org/10.15548/jostech.v1i2.3099
Abstract views : 260 times
PDF : 157 times

References


D. Michael and D. Gustina, “Rancang Bangun Prototype Monitoring Kapasitas Air Pada Kolan Ikan Secara Otomatis Dengan Menggunakan Mikrokontorell Arduino,” IKRA-ITH Inform., vol. 3, no. 2, pp. 59–66, 2019.

A. Saefullah, D. Immaniar, and R. A. Juliansah, “Sistem Kontrol Robot Pemindahan Barang Menggunakan Aplikasi Android Berbasis Arduino Uno,” vol. 8, no. 2, 2015.

Afiyah and Dkk, “Evaluasi Pengenalan Tata Cara Berwudhu Dalam Pengembangan Pendidikan Agama Islam Melalui Media Gambar Pada Kelompok B Di RA Asiah Kota Pekanbaru,” J. Pendidik. Islam Anak Usia Dini, vol. 2, no. 1, pp. 73–83, 2019.

M. Susilo and R. Kurniati, “Rancang Bangun Website Toko Online Menggunakan Metode Waterfall,” Nas. Inform. dan Teknol. Jar., vol. 2, no. 2, pp. 98–105, 2018.

A. U. Faruq, “Rancang Bangun Aplikasi Rekam Medis Poliklik Universitas Trilogi,” J. Inform., vol. 9, no. 1, pp. 1017–1027, 2015.

M. Syahwill, Panduan Mudah Simulasi dan Praktek Mikrokontroler Arduino. 2013.

T. D. S. Suyadhi, Buku Pintar Robotika. 2010.

H. Andrianto and A. Darmawan, Arduino Belajar Cepat dan Pemograman. 2017.

Ridarmin and Z. P. Pertiwi, “Prototype Penyiraman Tanaman Hias Dengan Soil Moisture Sensor Berbasis Arduino,” J. Inform. dan Komput., vol. 10, no. 1, pp. 7–11, 2018.

H. Yenni and A. Patria, “Rekayasa Parking Assistance System Kendaraan dengan Sensor Ultrasonik,” JSM STMIK Mikroskil, vol. 17, no. 1, pp. 49–58, 2015.

R. Shaputra, P. Gunoto, and M. Irsyam, “Kran Otomatis Pada Tempat Berwudhu Menggunakan Sensor Ultrasoni Berbasis Arduino Uno,” Sigma Tek., vol. 2, no. 2, pp. 192–201, 2019.

S. S. Kurniasih, D. Triyanto, and Y. Brianorman, “Rancang Bangun Alat Pengisi Air Otomatis Berbasis Mikrokontroler,” J. Coding, Sist. Komput. Untan, vol. 4, no. 3, pp. 43–52, 2016.

R. Triady, D. Triyanto, and Ilhamsyah, “Prototype Sistem Keran Air Otomatis Berbasis Sensor Flowmeter Pada Gedung Bertingkat,” J. Coding Sist. Komput. Unta, vol. 03, no. 3, pp. 25–34, 2015.

D. Suprianto and Dkk, Microcontroler Arduino Untuk Pemula. 2019.

S. A. Hulukati and I. A. Salihi, “Rancang Bangun Alat Wudhu Otomatis Berbasis Arduino Uno Di Mesjid AL-ICHSAN Gorontalo,” Dielektrika, vol. 5, no. 2, pp. 116–124, 2018.

W. Kusrini and Dkk, “Membangun Alat Terapi Kaki Berbasis Mikrokontroler Arduino Menggunakan Bluetooth Smartphone Android,” Sains dan Inform., vol. 4, no. 2, pp. 112–119, 2018.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 JOSTECH: Journal of Science and Technology

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.